EDNord QMS 4060 Manual Download Page 311

Page: 311 / 340

Repacking

Consumables

C-7

Repacking the Printer

Remove the developer waste bottle and move the cap to the
sealed position.

Store the developer waste bottle for later use.

▲

Caution:

Do not repack the developer waste bottle. It will spill

during shipment. Keep it until the printer is shipped back to you.

Turn off the printer.

Removing Toner

Before repacking the printer you should ensure the toner
hopper is as low as possible.

Remove the toner waste bottle and store for later use.

▲

Caution:

Do not repack the waste toner bottle. It will spill during

shipment. Keep it until the printer is shipped back to you.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for QMS 4060





















































































































































































































































































































































Search results

Summary of Contents for QMS 4060

Reviews:

Related manuals for QMS 4060

Brands by name

Popular brands

EDNord QMS 4060, Manual

Search results

Summary of Contents for QMS 4060

Reviews:

Related manuals for QMS 4060

Brands by name

Popular brands