EDNord QMS 4060, Manual

Page: 100 / 340

Paper Jams
QMS 4060 Print System Operation 4-2
Paper Jams
Paper Path
Understanding how paper travels inside the printer helps you better
handle paper jams.
After a sheet of paper is fed from the tray, it travels to the drum unit
where toner is attracted onto the paper by means of electrostatic
charge. Then, the paper moves to the fuser assembly area where
toner is melted onto the paper. Finally, the printed sheet arrives at the
output tray, depending on the paper delivery selected.
Automatic Jam Recovery
With most printers, if a jam occurs, you must remove the jammed
paper and then reprint the job. However, the QMS 4060 Print System
provides automatic jam recovery (when enabled through the Adminis-
tration/Engine/Page Recovery menu). If a paper jam occurs, remove
the jammed paper, and the printing automatically resumes from the
page the printer stopped at when the jam occurred.
» Note: For automatic jam recovery to work, it is necessary to leave the
printer turned on when you remove the jammed paper.
Clearing Paper Jams
Locating Paper Jams
When a paper jam occurs, a
PAPER JAM
message displays in the
message window. Frequent jams in any area indicate that area should
be checked, repaired, or cleaned. Repeated jams may also happen if
you are using the wrong size or weight paper.
Check the instructions inside the front door of the printer for a quick
reference to clearing jams.
There are six areas inside the front door of the printer that are num-
bered 1 through 6. The printer jam messages list these numbers for a
general area to check for jams.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500