EDNord QMS 4060, Manual

Page: 187 / 340

Console
Commands
6-47 Local and Remote Console
Put the System On Line in Admin Mode
Session Termination Commands
Session Termination commands allow you to terminate the console
session or reboot the whole system.
Terminating the Console Session
Command exit (x)
Purpose Switch the console from admin mode to user mode and
put the system on line.
Mode admin
Notes When you exit from the admin mode, the offline prompt
changes to the general remote console user/offline
prompt, as shown in the example below.
Example
admin->exit
↵
QMS 4060 Print System->idle
Command quit (q)
Purpose Terminate the current console session.
Mode user, offline, admin
Notes When you quit a remote console session, a message
displays that tells you the connection is closed and who
closed it. In this example, b@venus closed the session.
If you do not quit the session, it is automatically closed
when the system is turned off.
For VMS users, when you quit the session, it may take
several seconds for the remote link to disconnect.
Example
QMS 4060 Print System->quit
↵
Connection closed by foreign host.
[b@venus, 42]
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500