EDNord QMS 4060, Manual

Page: 188 / 340

Console
Commands
QMS 4060 Print System Operation 6-48
Rebooting the System
Forced Console Termination
A system may have a daughterboard that supports a remote console
connection timeout option. This option sets a console idle time limit. If
no activity is detected for a session within the time limit, the session is
terminated.
Certain printer configuration menu options, like memory configura-
tion, require a system reboot to take effect. Changing these options
causes the system to reboot and terminate all sessions when the
user leaves the configuration menu.
Local Console Override
Some systems may have a directly linked console called the local
console. There are two differences between operation with a local
console and operation through a remote console:
n
The quit command has no effect on a local console.
n
You cannot enter any command from a remote console when it is
in blocked mode.
Command reboot
Purpose Reboot the system and terminate all console sessions.
This is similar to the reset command, except that it
does not reset the system configuration to factory
default.
Mode admin
Notes The value in brackets [ ] is the current value for the
selection. Any job in the system is lost after the reboot.
Example
admin->reboot
↵
Reset printer configuration (y/n) [n]: y
↵
Printer configuration reset
admin->Idle
admin->
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500