EDNord QMS 4060, Manual

Page: 153 / 340

Using Remote
Console
6-13 Local and Remote Console
Commands for Switching Among Console Modes
» Note: A console in blocked mode returns to user mode when the
system is on line. See “User/Offline Mode Commands” on page 6-14
for more specific information on each of these commands.
Using Remote Console
Whether you use CrownAdmin 3 or a TCP/IP host with Telnet com-
mands, Remote Console works the same once you are in the ses-
sion. Depending upon how the system administrator sets up access
privileges, password security, and disk drives, some or all of the com-
mands in the “Remote Console Commands” section may be available
for you to use.
» Note: Options with an
n
parameter allow you to specify a job
number. For example, if you enter cancel without the parameter, all
jobs in the queue are canceled. To cancel just one job, replace the
n
with the job number.
Also, the following commands are available in the admin mode only if
the printer you are using has a disk drive: cd, copy, cp, del, rem,
format, ls, dir, pwd, rename, and mv.
Switch from Mode Switch to Mode
User Offline Admin
User N/A offline admin
Offline online N/A admin
Admin exit N/A N/A
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500