EDR-5000
IM02602007E
Name
Description
Logic.LE80.Reset Latch-I
State of the module input: Reset Signal for the Latching
Sgen.Running
Signal: Measuring value simulation is running
Sgen.Ex Start Simulation-I
State of the module input:External Start of Fault Simulation (Using the test parameters)
Sgen.ExBlo
Module Input State: External Blocking
Sgen.Ex ForcePost-I
State of the module input:Force Post state. Abort simulation.
Sys.PS 1
Signal: Parameter Set 1
Sys.PS 2
Signal: Parameter Set 2
Sys.PS 3
Signal: Parameter Set 3
Sys.PS 4
Signal: Parameter Set 4
Sys.PSS manual
Signal: Manual switch over of a Parameter Set
Sys.PSS via Comm
Signal: Parameter Set Switch via Communication
Sys.PSS via Inp fct
Signal: Parameter Set Switch via Input Function
Sys.Min. 1 param changed
Signal: At least one parameter has been changed
Sys.Program Mode Bypass
Signal: Short-period bypass of the Program Mode.
Sys.Maint Mode Active
Signal: Arc Flash Reduction Maintenance Active
Sys.Maint Mode Inactive
Signal: Arc Flash Reduction Maintenance Inactive
Sys.MaintMode Manually
Signal: Arc Flash Reduction Maintenance Manual Mode
Sys.Maint Mode Comm
Signal: Arc Flash Reduction Maintenance Comm Mode
Sys.Maint Mode DI
Signal: Arc Flash Reduction Maintenance Digital Input Mode
Sys.Ack LED
Signal: LEDs Acknowledgment
Sys.Ack RO
Signal: Acknowledgment of the Relay Outputs
Sys.Ack Comm
Signal: Acknowledge Communication
Sys.Ack TripCmd
Signal: Reset Trip Command
Sys.Ack LED-HMI
Signal: LEDs Acknowledgment :HMI
Sys.Ack RO-HMI
Signal: Acknowledgment of the Relay Outputs :HMI
Sys.Ack Comm-HMI
Signal: Acknowledge Communication :HMI
Sys.Ack TripCmd-HMI
Signal: Reset Trip Command :HMI
Sys.Ack LED-Comm
Signal: LEDs Acknowledgment :Communication
Sys.Ack RO-Comm
Signal: Acknowledgment of the Relay Outputs :Communication
Sys.Ack Counter-Comm
Signal: Reset of all Counters :Communication
Sys.Ack Comm-Comm
Signal: Acknowledge Communication :Communication
Sys.Ack TripCmd-Comm
Signal: Reset Trip Command :Communication
Sys.Ack LED-I
Module Input State: LEDs Acknowledgment by Digital Input.
Sys.Ack RO-I
Module Input State: Acknowledgment of the Relay Outputs.
Sys.Ack Comm-I
Module Input State: Acknowledge Communication via Digital Input. The replica that Communication has
received from the device is to be reset.
Sys.PS1-I
State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
www.eaton.com
1002