Eaton EDR-5000, Installation, Operation And Maintenance Manual, Page: 287 / 1017

EDR-5000 IM02602007E
Direct Commands of the System Module
Parameter Description Setting range Default Menu path
Ack RO LED Comm
TCmd Reset the Relay Outputs, LEDs, Communication, and the
Trip Command. Inactive,
Active
Inactive [Operation
/Reset]
Ack LED All acknowledgeable LEDs will be acknowledged. Inactive,
Active
Inactive [Operation
/Reset]
Ack RO All acknowledgeable Relay Outputs will be
acknowledged. Inactive,
Active
Inactive [Operation
/Reset]
Ack Comm Communication will be acknowledged. Inactive,
Active
Inactive [Operation
/Reset]
Reboot Rebooting the device. No,
Yes
No [Service
/General]
MaintMode
Manually Arc Flash Reduction Maintenance Switch Mode: Manual
Activation of the Arc Flash Reduction Mode
Only available if: Maint Mode = Activation Manually
Maint Mode inacti-
ve,
Activation via
Comm,
Activation via DI,
Inactive,
Active
Inactive [Service
/MaintMode
Manually]
Program Mode
Bypass Short-period bypass of the Program Mode. Inactive,
Active
Inactive [System Para
/General Settings]
CAUTION: Manually rebooting the device will release the Supervision Contact.
www.eaton.com 287