EDR-5000
IM02602007E
Assignment List
The »
ASSIGNMENT
LIST
«
below
summarizes all module outputs (signals) and inputs (e.g.: states of the assignments).
Name
Description
-.-
No assignment
Prot.Available
Signal: Protection is available.
Prot.Active
Signal: Active
Prot.ExBlo
Signal: External Blocking
Prot.Pickup Phase A
Signal: General Pickup Phase A
Prot.Pickup Phase B
Signal: General Pickup Phase B
Prot.Pickup Phase C
Signal: General Pickup Phase C
Prot.Pickup IX or IR
Signal: General Pickup - Ground Fault
Prot.Pickup
Signal: General Pickup
Prot.Trip Phase A
Signal: General Trip Phase A
Prot.Trip Phase B
Signal: General Trip Phase B
Prot.Trip Phase C
Signal: General Trip Phase C
Prot.Trip IX or IR
Signal: General Trip Ground Fault
Prot.Trip
Signal: General Trip
Prot.Res Fault a Mains No
Signal: Resetting of fault number and number of grid faults.
Prot.I dir fwd
Signal: Phase current failure forward direction
Prot.I dir rev
Signal: Phase current failure reverse direction
Prot.I dir n poss
Signal: Phase fault - missing reference voltage
Prot.IR dir fwd
Signal: IR Ground fault (calculated) forward
Prot.IR dir rev
Signal: IR Ground fault (calculated) reverse direction
Prot.IR dir n poss
Signal: IR Ground fault (calculated) direction detection not possible
Prot.IX dir fwd
Signal: IX Ground fault (measured) forward
Prot.IX dir rev
Signal: IX Ground fault (measured) reverse direction
Prot.IX dir n poss
Signal: IX Ground fault (measured) direction detection not possible
Prot.ExBlo1-I
Module Input State: External Blocking1
Prot.ExBlo2-I
Module Input State: External Blocking2
Ctrl.Local
Switching Authority: Local
Ctrl.Remote
Switching Authority: Remote
Ctrl.SG Indeterm
Minimum one Switchgear is moving (Position cannot be determined).
Ctrl.SG Disturb
Minimum one Switchgear is disturbed.
Bkr.SI SingleContactInd
Signal: The Position of the Switchgear is detected by one auxiliary contact (pole) only. Thus indeterminate
and disturbed Positions cannot be detected.
Bkr.Pos not CLOSE
Signal: Pos not CLOSE
www.eaton.com
949