Eaton EDR-5000, Installation, Operation And Maintenance Manual, Page: 24 / 1017

EDR-5000 IM02602007E
Device Planning Parameters of the Device
Parameter Description Options Default Menu path
Hardware Variant
1 Optional Hardware Extension »A« 8 DI, 2 Form A, 8+1
Form C, ZI,
»B« 16 DI, 2 Form A,
8+1 Form C, ZI
8 DI, 2 Form A,
8+1 Form C, ZI [EDR-5000]
Hardware Variant
2 Optional Hardware Extension »0« Phase Current
5A/1A, Ground Current
5A/1A,
»1« Phase Current
5A/1A, Sensitive Ground
Current 5A/1A
Phase Current
5A/1A, Ground
Current 5A/1A [EDR-5000]
Communication Communication »B« RS 485: Modbus
RTU,
»H« Ethernet: IEC61850,
»I« RS 485 + Ethernet:
Modbus RTU + Modbus
TCP
»I« RS 485 +
Ethernet: Modbus
RTU + Modbus
TCP [EDR-5000]
Printed Circuit
Board Printed Circuit Board »A« Standard,
»B« Conformal Coating
»A« Standard [EDR-5000]
There are two mounts available for the EDR-5000: a Standard Mount and a Projection Mount. To order the EDR-5000
with a Standard Mount, append the device code with a zero (0). To order the EDR-5000 with a Projection Mount, ap-
pend the device code with a one (1). Refer to the table below for details of the available device options.
A retrofit kit for Eaton IQ cutouts is available (Style No. 66D2217G01 – Catalog No. ER-IQEDRKIT). This kit is required
when replacing a DT-3000 with the EDR-5000.
www.eaton.com 24