PBM-04/U BI-STABLE VOLT FREE RELAY
SERVICE MANUAL
Zakład Mechaniki i Elektroniki
ZAMEL
sp.j.
J.W. Dzida, K. Łodzińska
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamelcet.com
, e-mail: [email protected]
VER. 001_04.08.2010
APPEARANCE
FEATURES
TECHNICAL DATA
DESCRIPTION
PBM-04/U
Tripping terminal:
IN
Tripping terminals for illuminated switches:
IN’, IN’
Tripping rated voltage: 12
÷
230 V AC/DC
Supply voltage tolerance: -15 ÷ +10 %
Rated frequency: 50 / 60 Hz
Rated power consumption:
0 mA
Rated triggering power consumption: 11 mA
Relay contact parameters: 1NO - 10 A / 250 V AC1 2500 VA
Number of terminals: 7
Section of wire conductors: 0,2 ÷ 2,50 mm
2
Operating temperature: -20
÷
+45
o
C
Operating position: optional
Fixing of the casing: TH35 rail (in accordance with PN-EN 60715)
Protection degree of casing: IP20 (PN-EN 60529)
Protection class:
II
Overvoltage category:
II
Degree of pollution: 2
Surge voltage: 1 kV (PN-EN 61000-4-5)
Dimensions: single module (17,5 mm) 90x17,5x66 mm
Weight: 0,065 kg
Compliance with the following standards: PN-EN 60669-1
PN-EN 60669-2-1
PN-EN 61000-4-2,3,4,5,6,11
PBM-04/U bi-stable relay is used to
control lighting or any other device with
the help of unipolar parallel connected
switches. Another push of any switch
causes actuation or disengagement of
devices connected to output terminals
(change in relay status). The device
enables to use typical unipolar switches
connected to IN inlet and switches with
illumination connected to IN’ inlets (trip
-
ping only from L line for 230V voltage).
Structure of the relay enables to record
the current status in case of loss of sup
-
ply voltage.
Zero power consumption
stands as an important feature of the
device.
This device must be in
-
stalled in one-phase sup
-
ply network, according to
legally binding regulations
and standards. Installation
must be carried out accor
-
ding to this instruction ma
-
nual. Procedures such as:
installation, connection and adjustment of
the device should be carried out by qualified
electricians who are familiarised with this in
-
struction manual and device functions. If the
casing is dismantled, the warranty expires
and there is the danger of an electric shock.
Before installation, make sure that voltage
is not present on the conductors. Use cross
screwdriver with diameter of 3.5 mm, for in
-
stallation. Transport, storage and use of this
device influence its correct operation. Instal
-
lation of this device is not recommended in
the following situations: lack of parts, dama
-
ge or deformations of the device. In the case
of incorrect functioning of the device, please
contact the manufacturer.
NOTE
● Bi-stable (biconditional) lighting con
-
trol,
● universal scope of 12 ÷ 230 V AC/DC
supply voltage,
● zero power consumption,
● memory of relay status,
● cooperation with numerous unipolar
switches, also the ones with illumina
-
tion,
● two wire control installation,
● relay output – one short circuiting con
-
tact with maximal capacity of 10 A.
Rela
y
o
u
t
pu
t
Trippi
ng
t
ermi
n
al (IN
)
Trippi
ng
t
ermi
n
als (IN’
)
P
ow
er suppl
y
t
ermi
n
al (A
2)
terminals (11, 11, 14)
The symbol showing a selective
collection of electric and
electronic equipment.
Used up equipment must not be
placed together with another kind
of waste.
