www.advancedco.com
Relay Output Cards
Features
The Mxp-007 and Mxp-008 are internal peripherals for use with the MxPro 4 panels. The units connect
directly to the panel’s motherboard and provide either 2 or 8 individually programmable 1-Amp rated, volt free,
clean contact outputs.
Each output can be individually assigned to an output group to provide full support for the MxPro 4
system’s
DynamiX zoning facilities. In addition, each output has a number of programmable operational parameters
including fail-safe, can-silence, allow walk test and delayed operation.
These features not only aid commissioning and cut down on expensive ancillary hardware but also allow the
system to be easily configured to provide full support for the more complex cause and effect configurations
using standard products.
