![background image](http://html1.mh-extra.com/html/ducati/monster-695/monster-695_user-manual_2537677182.webp)
Front fork
Tighten to
30-40
Nm.
Fill each leg with half the amount of the recommended oil (Sect. C 2,
).
Pump up and down to fill whole inner volume.
Take both damper cartridge and outer sleeve to the end of their stroke.
Fill the remaining oil into the leg and measure level.
Caution
Keep fork leg vertical when measuring oil level. Make sure oil level is the same in both fork legs.
Recommended oil:
SHELL Advance Fork 7.5 or DONAX TA
Standard capacity:
0.480 cu. dm each leg
Standard oil level:
104 mm
Oil quantity affects fork behaviour when at the end of the compression stroke.
High oil level increases compression loading, low oil level will lessen it.
Remove oil from the spring (9) and the lock nut (23).
Install the following components:
the preload tube (10), the spring (9)
with the taper side facing the lock nut (23) and the washer (8).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_G_2_8_00.33.1.html (11 of 14) [10/7/2008 8:43:44 PM]