![background image](http://html1.mh-extra.com/html/ducati/monster-695/monster-695_user-manual_2537677293.webp)
Throttle body for plastic tank
Refitting the throttle body
If you have removed the hose couplings (4), refit them to the throttle body and lock them with clips (3). Correct
position of hose couplings and clips is shown in the figure.
Note
Fit the hoses with the smaller diameter end facing the throttle body.
Push the hoses fully home onto the throttle body. Line up the mould parting lines (D) visible on the hoses with those
(F) of the throttle body.
Tighten the clips to the specified torque (Sect. C 3,
). Position them as shown in the figure and
make sure they do not slip off the hose coupling grooves (E).
Position the complete throttle body (11) to the motorcycle.
Place the clips (3) in their grooves in the intake manifolds and tighten to the specified torque (Sect. C 3,
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_L6_10_00.50.1.html (4 of 6) [10/7/2008 8:44:47 PM]