Steering
Fit the washer (8), the seal ring (7) with trim side up and the inner ring (A) of the lower bearing (
6
) into the steering
shaft. Heat it up at
125 °C
for ten minutes first.
Fit the drift no.
88713.1072
into the steering shaft. Keep the inner ring (A) pressed onto seal (7) manually for at
least 10-15 seconds.
Grease the inner bearing ring (A) with the specified grease.
Fit the ball ring (B) into the steering shaft with the smaller side of the cage up and grease.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_H_2_7_00.42.1.html (6 of 8) [10/7/2008 8:44:15 PM]