Fuel injection-ignition system components
Caution
If the control unit is replaced, it is necessary to use the DDS and carry out the procedure for
setting the throttle position sensor (TPS)
(Sect. D 5).
Make sure the clip (B) for connector (1) is
“
released
”
(as shown in the diagram).
Push the connector axially fully home into the control unit.
Rotate the clip (B) until locking the connector (clip is in the
“
locked
”
position).
Repeat procedure for the other connector (2).
Make sure the connector clip is
“
released
”
.
Push the connector axially fully home into the control unit.
Rotate the clip until locking the connector (clip is in the
“
locked
”
position).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_M_3_3_00.57.1.html (4 of 15) [10/7/2008 8:45:06 PM]