Cylinder heads: side covers / timing system
Disassembling the mobile tensioner
Remove the circlip (19) to release the bearings (20).
Check that the tensioner bearings rotate freely without exceeding play.
Install bearings (20) into plate (21), take them fully home. Install the snap ring (19) in its seat (A) on pin (21).
Disassembling the belt rollers
Loosen and remove the three screws (12).
Slide out washer (15).
Pull belt roller (B) out of the flange (17).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_4B9_00.63.1.html (7 of 17) [10/7/2008 8:45:27 PM]