![background image](http://html1.mh-extra.com/html/ducati/monster-695/monster-695_user-manual_2537677239.webp)
Footpeg supports
Ensure that the straight end of the spring locates into the plate hole.
Grease the pin (4) and fit it from the top end. Fit the snap ring (5) at the other end to hold the pin in place.
Position spring (12), plates (10), balls (9) and rear footpeg (7) between the end stops of the right footpeg plate (8).
Grease the pin (4) and fit it from the top end. Fit the snap ring (5) at the other end to hold the pin in place.
Check the condition of the vibration damping pads (1) on the footpeg plate.
Locate footpeg plate to the threaded holes in the frame and engine casing.
Caution
On refitting, position the washers (
2
) at the frame mounting points and the washers (
11
) at the engine mounting
points.
Secure the footpeg plate to engine with the threaded pins (
3
) and to frame with the threaded pins (13).
Tighten the threaded pins to the specified torque (Sect. C 3,
).
Start the silencer securing screw (E) in its thread, fit relevant washers and nuts.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_H_4_7_00.43.1.html (4 of 5) [10/7/2008 8:44:18 PM]