![background image](http://html1.mh-extra.com/html/ducati/monster-695/monster-695_user-manual_2537677430.webp)
Cylinder / piston assy
Push connecting rod small end into the piston so as to line up gudgeon pin (3) hole. Lubricate and fit gudgeon pin.
Gudgeon pin must slide smoothly inside the con-rod small end bushing and piston (9).
Block off casing opening with a cloth, then fit circlip (10).
Caution
At reassembly always use new circlips (10).
Press cylinder (8) down until it contacts the casing.
Perform same operations to the other cylinder.
Operations
Reference See Section
Refit heads on the engine
N 4.4,
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_5_9_00.66.1.html (12 of 13) [10/7/2008 8:45:50 PM]