![background image](http://html1.mh-extra.com/html/ducati/monster-695/monster-695_user-manual_2537677205.webp)
Rear brake
Caution
Bold reference numbers in this section identify parts shown in this exploded view diagram. These parts do not appear
in the figures near the text.
Removing the rear brake system
Operations
Reference See Section
Draining the braking system
Remove the screw retaining the hose
to the rear brake cylinder and the
seals
F 4,
Removing the rear brake master
Caution
Critical safety components. The brake caliper manufacturer recommends that you do not attempt to service the
internal components of the brake caliper. Incorrect overhaul of these critical safety components can endanger rider
safety.
Maintenance operations on these units are limited to replacing brake pads, fasteners and bleed unit.
Release and remove the special screw (1) retaining the hose (A) to the rear brake caliper and the seals (2).
Note
Take a rag at hand to dry any possible brake fluid spillage.
Unscrew the screw (16).
Remove the hose (A) together with the retainer (12).
Unscrew the two screws (5) that retain the rear brake caliper to the caliper mounting plate. Collect the spring
washers (
6
) and the washers (
7
).
Remove the caliper (3).
Note
For brake pads replacement operations see section D 4,
Checking brake pad wear. Changing brake pads
To remove the speed sensor (13), unscrew the screw (14) retaining the sensor to the caliper mounting plate and
collect the spacer (
15
).
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_G_6_8_00.37.1.html (2 of 4) [10/7/2008 8:44:00 PM]