Head unit: valves - rocker arms
Position the opening rocker arm (3) and secure it with the clip (1). With the valve in the rest position, check clearance
between rocker arm (3) and shim (6) (Sect. N 4.1,
Checking opening clearance (Sa) at intake/exhaust
).
If clearance is outside the specified limit, adjust valve clearance (Sect. N.4.1,
Checking and adjusting valve clearance
).
Repeat procedure for the exhaust valve (
16
).
Operations
Reference See Section
Refit the valve covers
N 4.3,
Reassembling the heads
) before installing the heads.
Caution
The locating pin (B) must be installed with the smallest hole pointing away from the cylinder (Sect. N 5,
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_4D9_00.65.1.html (21 of 23) [10/7/2008 8:45:45 PM]