![background image](http://html1.mh-extra.com/html/ducati/monster-695/monster-695_user-manual_2537677622.webp)
Immobilizer and Transponder
Remove the immobilizer antenna wire ties.
Undo the two nuts (1) retaining the Immobilizer antenna guard.
Remove the cover (2) and lift the Immobilizer antenna (3) clear of the key-operated switch.
Remove the special screws (6).
Remove the key-operated switch (9) complete with plate (8) from the frame.
Separate plate (8) and key-operated switch (9).
Refitting the immobilizer
Thread the immobilizer antenna wire (3) through the plate (8).
Fit plate to key-operated switch (9). Thread the antenna wire through the plate slot (A).
Apply threadlocker to the two special screws (6).
Install the key-operated switch (with plate and antenna) to the frame (7) and start the two special
screws (6) in their holes.
Turn the screws fully in and tighten to the specified torque (Sect. C 3,
Apply a drop of Loctite inside the cover (2) at the positions shown.
Locate antenna (3) to cover (2), and secure it in place with the two pegs (C) of the cover.
Fit the cover on the key-operated switch, easing the antenna wire downwards.
Start the two blind nuts (1) on their threads.
Tighten nuts to the specified torque (Sect. C 3,
).
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_P_8_9_00.85.1.html (7 of 9) [10/7/2008 8:47:22 PM]