![background image](http://html1.mh-extra.com/html/ducati/monster-695/monster-695_user-manual_2537677497.webp)
Flywheel - generator
Check air gap between sensor and timing intermediate gear, as described below.
Checking the engine sensor air gap
Engine sensor can take readings of timing lay gear teeth and, thanks to the gap equal in size to two teeth, it can
calculate engine number of revolutions per minute.
If the generator, the generator cover or the sensor have been changed, check sensor air gap (see procedure below).
Remove screw plug (B) from the inspection hole in the LH side casing.
Do not check the air gap at the teeth gap.
Fit a feeler gauge (A) into the hole and measure the air gap between the sensor and the timing intermediate gear
teeth.
Check that air gap is
0.75-0.95
mm.
If this is not the case, loosen sensor (7) screw (1) in order to slide out shim (8) and to change it with one having a
suitable thickness.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_8_9_00.72.1.html (13 of 14) [10/7/2008 8:46:19 PM]