![background image](http://html1.mh-extra.com/html/ducati/monster-695/monster-695_user-manual_2537677207.webp)
Rear brake
Tighten the special screws (1) to the specified torque (Sect. C 3,
). Position the brake hose (A)
to the swingarm and secure the retainer (12) with the screw (16).
Fit the rear brake caliper (3) to the brake disc matching the holes in the caliper plate. Grease the thread and
underhead of the screws (5). Slide the washers (
7
) and the spring washers (
6
) on the screws (5). Tighten the screws
(5) to the specified torque (Sect. C 3,
Note
The air gap between sensor (13) and brake disc retaining screw (14) must be
0.6-2.2
mm.
Operations
Reference See Section
Tighten the screw retaining the hose
to the rear brake master cylinder
F 4,
Refitting the rear brake master
Fill the rear braking system
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_G_6_8_00.37.1.html (4 of 4) [10/7/2008 8:44:00 PM]