![background image](http://html1.mh-extra.com/html/ducati/monster-695/monster-695_user-manual_2537677470.webp)
Gearbox assembly: gearbox shafts
Pull out the fork selector drum (13). Pay attention to the shims (
31
) and (
27
) fitted on the shaft, make sure to refit
them to their original position.
Now you can replace the needle roller stop ring (
32
) and the special needle rollers (
14
).
Remove the gear selector forks (29) and (28).
Remove gearbox primary (2) and secondary (25) shafts complete with gears. Do not damage or lose the shims at
shaft ends.
If the bearing inner rings (A) remained on the shafts, slide them out of the gearbox primary (2) and secondary (25)
).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_7B9_00.71.1.html (3 of 17) [10/7/2008 8:46:12 PM]