Gearbox assembly: gearbox shafts
Fit all gears onto gearbox shafts following the removal procedure in the reverse order.
Special care must be taken when fitting idle gears. Installation of 3rd and 4th gears and all fasteners onto the
secondary shaft is here shown by way of example.
Fit the circlip (7). Ensure it is fully seated into the shaft. It is recommended a suitable sized tube drift be used to seat
the ring.
Fit the safety washer (6) into the shaft; it should rest against the circlip.
Grease the needle roller cage (4) richly with the recommended grease and seat it; open it a bit to fit onto the shaft.
Fit the gear for 3rd speed (22).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_7B9_00.71.1.html (14 of 17) [10/7/2008 8:46:12 PM]