![background image](http://html1.mh-extra.com/html/ducati/monster-695/monster-695_user-manual_2537677579.webp)
Charging system
–
battery
Note
References (16) and (19) are the same as those of diagrams under
“
Arrangement of wiring on frame
of this section.
).
Lift the fuel tank (Sect. L 2,
).
Undo the screws on the terminals (16) and (19). Always start from the negative terminal.
Undo the retainer (2) and then remove the battery.
Refitting the battery
For correct reassembly, reverse the disassembly procedures. Ensure that terminals are not oxidized, then tighten
terminal screws to the specified torque (Sect. C 3,
Battery mount
Remove the battery as described under "
" as described in this section.
Remove the electronic control unit as described under paragraph
“
in Sect. M 3.
Remove the
as described in Sect. M 3.
Slide out the battery mat and relevant drain tube.
Unscrew the four screws (7) and remove the battery mount (5) together with the plate (6).
Collect the four vibration dampers (4).
Undo the nuts (1) and remove them from the retaining screws (2) at the vertical head and remove the bracket (3).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_P_2_9_00.79.1.html (7 of 12) [10/7/2008 8:46:59 PM]