![background image](http://html1.mh-extra.com/html/ducati/monster-695/monster-695_user-manual_2537677215.webp)
Rear suspensions
Grease the thread and underhead of the upper retaining screws (7) and (5) of shock absorber and linkage and start
them in the holes in the rocker arm.
Insert the upper ball joint of the shock absorber into the rear hole of the rocker arm.
Tighten the screw (7) to the specified torque (Sect. C 3,
Install the bushes (4) to both rocker arm ball joints.
Insert the upper end of the linkage into the rocker arm and tighten the screw (5) to the specified torque (Sect. C 3,
Position the bottom end of shock absorber and linkage to the swingarm.
Grease threaded bush (
12
) sliding surface and fit the bush onto the support from the parallel side.
Grease thread, underhead and sliding surface of the lower retaining screw (11) and fit the screw into the swingarm
from the right side.
Tighten the bolt (11) to the specified torque (Sect. C 3,
Refit the seat (Sect. E 3,
).
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_G_7_8_00.38.1.html (8 of 8) [10/7/2008 8:44:04 PM]