Steering
Install the steering head (2) to the ring nut (3) so that the fork leg clamp holes match those in the bottom yoke. Refit
the fork legs as described in Sect. G 2,
.
Grease the screw (1).
Tighten the screw (1) on the steering head to the specified torque (Sect. C 3,
If removed, fit the splashguard (13), apply threadlocker to the screws (10) and tighten them to the specified torque
(Sect. C 3,
).
Operations
Reference See Section
Refit the fork legs
Refit the handlebar
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_H_2_7_00.42.1.html (8 of 8) [10/7/2008 8:44:15 PM]