YAMAHA WOLVERINE
Plow Mount
PART # 105695
Hardware Kit: HK-150
Kit Components:
Qty. Part Description
1................. Plow Mount Plate
2................. 3/8”-16 Square U-Bolt
2................. 3/8”-16 x 1” Flanged Bolt
4................. 3/8”-16 Nylock Flanged Nut
INSTALLATION INSTRUCTIONS:
1. Install your winch mount following the
instructions provided with your mount.
Note: It is easier to install the plow mount if
installed before the winch and roller fairlead.
2. Install the plow mount plate using the 1” flanged
bolts, placing bolts through holes (A) in the winch
mount plate. See
Figure 2 and 3
.
3. Using the plow mount as a template mark and drill
holes on the plastic skid plate as shown in
Figure
4
.
4. Remove plow mount plate and drill holes.
5. Repeat step 2 and reinstall the plow mount plate.
Mark Drill Holes
Mark Drill Holes
Figure 3: Install to winch mount.
Figure 4: Mount Plate Install
Figure 1
©2013 Copyright Kappers Fabricating, Inc. All rights reserved
This mount requires
KFI winch mount
#
101
515
A
Figure 2: Plow Mount Bolt Locations.
