1-45
DX380LC-7
Never turn starter switch to "O" (OFF) position when traveling.
This can lead to a loss of steering control.
Do not operate attachments while traveling.
Do not change selected travel mode (FAST/SLOW) while
traveling.
Never travel over obstacles or excessive slopes that will cause
machine to tilt severely. Avoid slopes or obstacles where the
machine is tilted more than 10° to the right or left or beyond its
maximum gradeability.
Do not operate steering controls suddenly. Work equipment can
hit ground and this can damage machine or structures in area.
When traveling on rough ground, travel at low speed, and avoid
sudden changes in direction.
Always operate within permissible water depth. Permissible
water depth is up to centerline of upper track roller(s).
When passing over bridges or structures on private land, check
that structure is strong enough to support weight of machine.
Before traveling on public roads, check with appropriate
authorities and follow their instructions.
Never exceed maximum permitted load for bridges.
Always operate machine with idler wheels to front under cabin
and drive sprockets to rear.
Know permitted ground pressure. Ground pressure of the
machine may change depending on attachment and load.
Keep height and length of attachment in mind.
EX1300681
40 - 50 cm (16 - 20 in.)
Travel Position
Figure 38
