1-27
DX380LC-7
ROPS Certification
This DOOSAN excavator has an operator's cabin that meets
ROPS requirements. The seat belt must be worn for roll-over
protection.
The ROPS certification plate (Figure 19) is found on the left side
of the cabin on most models. It may vary slightly in its location
on some models.
Check the ROPS cabin, mounting, and hardware for damage.
Never modify the ROPS cabin. Replace the cabin and hardware
if damaged. See your DOOSAN distributor for parts.
ROPS
−
Roll-over Protective Structure complies with
ISO 12117-2:2008, EN13531:2001.
DS1901183
Figure 19
WARNING
AVOID DEATH OR SERIOUS INJURY
Never modify the operator cabin by welding, grinding,
drilling holes or adding attachments unless instructed in
writing by DOOSAN. Changes to the cabin can cause loss
of operator protection from roll-over and falling objects,
and can result in death or serious injury.
