3-13
DX380LC-7
Travel Control Lever Operation
1.
To travel straight (Figure 10), push both travel control
levers/pedals fully forward or backwards. The farther the
levers/pedals are pressed, the faster the travel speed.
NOTE:
"X" is the sprocket end of the track.
2.
Pivot turns (Figure 11) are made by rotating only one track
forward or backward. The machine will pivot on the
nonmoving track.
NOTE:
"X" is the sprocket end of the track.
3.
Spin turns (counterrotation) (Figure 12) are made by
rotating one track forward and one track backward. The
machine will spin around its center point.
NOTE:
"X" is the sprocket end of the track.
4.
Stopping travel (Figure 13) - Returning travel levers to
"NEUTRAL" position will automatically apply brakes and
stop excavator.
NOTE:
"X" is the sprocket end of the track.
DS1901201
"X"
Figure 10
DS1901202
"X"
Figure 11
DS1901203
"X"
Figure 12
DS1901204
"X"
Figure 13
