DX380LC-7
Foreword
0-10
Regulation (EU) 2017/654 Annex XV
Doosan provide to the customer all information and necessary instructions for the correct operation of the engine
in order to maintain the gaseous and particulate pollutant emissions of the engine within the limits of the approved
engine type or engine family.
The customer should operate machine in accordance with the following information and instruction.
Engine Operation and Maintenance
You must comply with the following things when you operate an engine.
•
The engine, including the emissions control system, shall be operated, used and maintained in accordance
with the instructions provided to the end users in order to maintain the emissions performance of the engine
within the requirements applicable to the engine's category.
•
No deliberate tampering with or misuse of the engine emissions control system in particular with regard to
deactivating or a reagent dosing system should take place.
•
This machine is equipped with an engine exhaust emission control system. The operator is responsible for
proper operation and maintenance of the emission controls system.
•
It is essential to take prompt action to rectify any incorrect operation, use or maintenance of the emissions
control system in accordance with the rectification measures indicated by the warnings referred to Emission
Control System
•
Where the engine is to be operated within the Union on diesel or non-road gas-oil, a fuel with sulphur
content not greater than 10 mg/kg (20 mg/kg at point of final distribution) cetane number not less than 45
and a FAME content not greater than 8% v/v shall be used.
•
Use the correct lubrication oil to maintain the performance of the emissions control system. Refer to "Table
of Recommended Lubricants" for more information.
•
Maintain in accordance with the scheduled emission-related maintenance requirements. Refer to "Hydraulic
Oil and Filter Service Intervals" for more information.
Malfunctions & Inducement
The operator will be informed by the operator warning system when the emission control system does not function
correctly.
Ignoring the operator warning signals will lead to the activation
of the operator inducement system, resulting in an effective
disablement of machine operation.
