DX380LC-7
Operation
3-4
Checks Before Starting Engine
Before starting engine, inspect the following items. If any
problem is found, repair it before machine operation. If the oil,
fuel or coolant level are below the "LOW" mark, add it. For detail
method, see "10 Hour / Daily Service" on page 4-25.
1.
Grease boom, arm and front attachment pins.
2.
Check engine oil level.
3.
Check level of hydraulic oil tank.
4.
Check fuel level.
5.
Check DEF (AdBlue
®
) level.
6.
Check oil level of swing reduction gear.
7.
Clean dust net in front of oil cooler and intercooler.
8.
Check cooling system and refill as required.
9.
Check level of window washer liquid.
10. Inspect the bucket teeth and side cutters for signs of wear.
11. Inspect engine fan blade.
12. Check air intake system.
13. Inspect seat belt for any damage and proper operation.
14. Inspect the structure for cracks and faulty welds.
15. Check the operation of all switches.
16. Check the operation of all exterior lights, horn, travel alarm/
swing alarm (if equipped), rear/side view camera and
control console indicator and monitor lights.
