DX380LC-7
Inspection, Maintenance and Adjustment
4-64
Swing Reduction Gear Oil - Change
NOTE:
Change swing reduction gear oil after first 500 hours
of operation or rebuild, and every 1,000 hours
thereafter.
1.
Park machine on firm and level ground. Lower attachment
to the ground and stop engine.
2.
Release the drain plug (3, Figure 79) and drain the swing
reduction gear oil into a container.
NOTE:
Dispose of drained fluids in compliance with all
applicable environmental regulations.
3.
After draining oil, tighten the drain plug.
4.
Remove breather/fill cap (1, Figure 79) and add oil to "H"
mark on dipstick (2).
DS2103965
3
2
1
Figure 79
WARNING
AVOID DEATH OR SERIOUS INJURY
The gear oil is very hot after the machine has been
operating. Shut all systems down and allow them to cool.
L
H
FG000419
Figure 80
