Domino Gx-OEM Product Manual Download Page 128

Page: 128 / 198

Live Status Screen

The following illustration shows the Live Status screen.

Setting Name

Explanation

Previous Screen

Go back to the Overall equipment efficiency screen.

Print group name

Identifies the print group.

Print head combination

Displays the print group's configuration.

Total print count

Displays how many prints have been made.

Resettable print counter

Displays how many prints have been made since the

resettable print counter was reset.

Information Bar

Shows status icons that will be displayed on the Home

Screen when this screen is closed.

Ink Level Icons

Depending on the selected information screen, different icons on the information bar show the

ink cartridge level for each print head.
The ink level icons are described in the table below:

> 42 ml of ink remaining.

> 31.5 ml of ink remaining.

OPERATION

123

EPT053091 - Issue 5 - 07 May 2021

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands