Domino Gx-OEM Product Manual Download Page 176

Page: 176 / 198

To import an image into the controller from a USB memory device:

1. Insert the USB memory device containing the image file into a USB port on the controller.

Note

FAT32

2. Wait until the USB icon on the information bar turns green.

3. Select

Home > Setup > File Manager

4. Open the

USB

folder.

5. Open the

sda1

sdb1

folder.

Notes

"sda1" and "sdb1" are the top level partitions of USB memory devices that

are connected to the controller.

2. "sda1" is the first USB memory device that was connected. "sdb1" is the

second USB memory device that was connected.

6. Open the folder that contains the image file.
7. Select the tick box next to the image to be imported.

8. Select the

Copy

Move

icon.

9. On the right side of the screen, navigate to and open the controller's

Label

folder.

10. Select the

Move/Paste

icon.

11. Remove the USB memory device from the controller.

End of procedure.

Import Font

Note

All true type fonts are supported.

To import a true type font into the controller from a USB memory device:

1. Insert the USB memory device containing the font file into a USB port on the controller.

Note

FAT32

2. Wait until the USB icon on the information bar turns green.

3. Select

Home > Setup > File Manager

OPERATION

171

EPT053091 - Issue 5 - 07 May 2021

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands