Domino Gx-OEM Product Manual Download Page 162

Page: 162 / 198

Element is locked.

Element is unlocked.

4. Select the

Save

icon to save the setting.

End of procedure.

Hide/Show Label Elements

Individual label elements can be hidden to stop them from being printed, when the rest of the

label is printed.
To make a label element printable or not printable:

1. In the label creator's side menu, select the

Element

tab.

2. Select the

Manage

menu.

3. In the list of elements, use the icons on the right to make the element printable or not

printable:

Element is printable.

Element is not printable.

4. Select the

Save

icon to save the setting.

End of procedure.

Preview Label

Select

Preview

at the top of the Label Creator to view a preview image of the label design.

Open and Edit a Label

Note

If you are editing a label that was created in external software such as Domino

Designer, some element types such as lines and shapes are not supported by

the Gx-Series controller's label editor.

OPERATION

157

EPT053091 - Issue 5 - 07 May 2021

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands