Domino Gx-OEM Product Manual Download Page 133

Page: 133 / 198

User Group

Password

Explanation

User

N/A

•

Start/Stop Printing.

•

View information screens.

•

Preview labels in the controller's label store.

•

View printer diagnostics/statistics screen.

•

Select the user interface language.

•

View system information.

•

View ink settings.

Settings

settingspass

Same as "User" plus:

•

Select labels for printing.

•

Adjust LCD backlight brightness.

•

Manually purge the print head.

Service

servicepass

Same as "Settings" plus:

•

Create and save new labels.

•

Edit labels.

•

Edit production line setup.

•

Edit global print settings.

•

Edit editor defaults.

•

View diagnostic logs.

•

Edit alert configuration.

•

Edit date and time.

•

Create label and service backups.

•

View file manager.

•

Edit ink restriction.

Administrator

adminpass

Administrator access to all printer settings.

End of procedure.

Log Out

To log out:

1. Select the

Padlock

icon in the bottom right corner of the user interface.

2. Select

Log out

End of procedure.

OPERATION

EPT053091 - Issue 5 - 07 May 2021

128

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands