Domino Gx-OEM Product Manual Download Page 196

Page: 196 / 198

9. Do not remove the USB memory device, until the restore is complete.

End of procedure.

Upgrade

To upgrade the printer's software:

1. Connect an empty USB memory device to a PC.

Note

FAT32

2. Copy the .zip upgrade file to the root directory of the USB memory device.

Note

Do not unzip/extract the .zip file.

3. Ensure the print groups are not printing. If the print groups are printing, select

Stop > All

print groups > Stop

4. Insert a USB memory device into one of the controller's USB sockets.
5. Select

Home > Setup > Backup & restore > Upgrade

6. Select the

Select upgrade file

text entry box.

7. Open the USB folder.
8. Open the

sda1

sdb1

folder.

Notes

"sda1" and "sdb1" are the top level partitions of USB memory devices that

are connected to the controller.

2. "sda1" is the first USB memory device that was connected. "sdb1" is the

second USB memory device that was connected.

9. Select the upgrade .zip file.
10. Select

Upgrade

11. Do not remove the USB memory device, until the upgrade is complete.

Note

The controller will automatically reboot, at the end of the upgrade process.

End of procedure.

MAINTENANCE & TROUBLESHOOTING

191

EPT053091 - Issue 5 - 07 May 2021

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands