Domino Gx-OEM Product Manual Download Page 186

Page: 186 / 198

No.

Alert Text

Alert Level

Description

6075

Check config file, groups

number locked

Alarm
(Red Alert)

There are more print groups configured

than enabled by the activation code.
Remedial action: Correct the number of

print groups in the configuration file.

6104

File

missing

Alarm
(Red Alert)

Cannot find the file.
Remedial action: Check the file. Copy

the file onto the system.

6111

Modify print label; not

enough memory

Alarm
(Red Alert)

Cannot load the label to print. Label file

is too big.
Remedial action: Reduce the number of

label elements and reduce the size of the

label.

6114

Faulty group number

Alarm
(Red Alert)

Error loading the label to print.
Remedial action: Check the print group

number. Correct the number and load

the label again.

6115

Fault print message field

Alarm
(Red Alert)

Error in the label.
Remedial action: Check elements in the

label and load the label again or restart

the controller.

6116

True type font error

Alarm
(Red Alert)

Error in label.
Remedial action: Check the font in the

label and restart the controller.

6118

Faulty print head number

Alarm
(Red Alert)

Error in label.
Remedial action: Check the print head

number. Correct the number and load

the label again.

6120

Error with bmp file

Alarm
(Red Alert)

Error in label.
Remedial action: Check the label's

graphic elements.

6121

Error in bmp file format

Alarm
(Red Alert)

Error in label.
Remedial action: Replace the incorrect

format graphic with correct format

graphic. Load the label again.

OPERATION

181

EPT053091 - Issue 5 - 07 May 2021

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands