Domino Gx-OEM Product Manual Download Page 179

Page: 179 / 198

To clear an alert or view information about how to solve the alert:

1. Select the

Status

tab.

2. The icons illustrated below will become available to select.

Icon

Explanation

Select the

Details

icon to display the following information:

•

Date and time the alert occurred.

•

Alert ID number.

•

Alert level.

•

Detailed information about the alert.

•

A clear button to acknowledge and clear the alert.

End of procedure.

Printing Process Alerts

No.

Alert Text

Alert Level

Description

5010

Cartridge

: Ink empty

Alarm
(Red Alert)

The ink cartridge is empty.
Remedial action: Change the ink

cartridge.

5011

Cartridge

: Ink level Low

Warning
(Amber Alert)

The ink cartridge level is Low.
Remedial action: Prepare to change the

ink cartridge.

5012

Cartridge

: Smartcard ink

out

Alarm
(Red Alert)

The ink cartridge is empty.
Remedial action: Change the ink

cartridge.

5013

Cartridge

: Ink empty

warning

Alarm
(Red Alert)

The ink cartridge is empty.
Remedial action: Change the ink

cartridge.

5014

Cartridge

: Smartcard ink

out warning

Alarm
(Red Alert)

The ink cartridge is empty.
Remedial action: Change the ink

cartridge

OPERATION

EPT053091 - Issue 5 - 07 May 2021

174

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands