Domino Gx-OEM Product Manual Download Page 195

Page: 195 / 198

3. Select

Home > Setup > Backup & restore > Backup

4. Select the

Select folder for backup

dialogue box.

5. Open the USB folder.
6. Open the

sda1

sdb1

folder.

Notes

"sda1" and "sdb1" are the top level partitions of USB memory devices that

are connected to the controller.

2. "sda1" is the first USB memory device that was connected. "sdb1" is the

second USB memory device that was connected.

7. Press

Select

to save the backup to the top level of the USB. Or open a folder where the

backup will be saved and press

Select

8. Select the backup type:

Backup Type

Details

Label

Save a backup of all label files and the fonts directory from the

controller.

Service

Save a backup of all the settings and configuration files that are

used to setup the controller.

Both

Save a backup of the label and service files combined.

9. Select

Backup

10. Do not remove the USB memory device, until the backup is complete.

End of procedure.

Restore

To restore the label, service or full backup:

1. Ensure the print groups are not printing. If the print groups are printing, select

Stop > All

print groups > Stop

2. Insert a USB memory device containing the label backup file into one of the controller's

USB sockets.

Note

FAT32

3. Select

Home > Setup > Backup & restore > Restore

4. Select the

Select backup file

dialogue box.

5. Open the USB folder.
6. Open the

sda1

sdb1

folder.

Notes

"sda1" and "sdb1" are the top level partitions of USB memory devices that

are connected to the controller.

2. "sda1" is the first USB memory device that was connected. "sdb1" is the

second USB memory device that was connected.

7. Navigate to and select the backup file.
8. Select

Restore

MAINTENANCE & TROUBLESHOOTING

EPT053091 - Issue 5 - 07 May 2021

190

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands