Domino Gx-OEM Product Manual Download Page 132

Page: 132 / 198

Log Out

To log out when remote security mode is enabled:

1. Select the

Padlock

icon in the bottom right corner of the user interface.

2. Select

Log out

End of procedure.

ADVANCED SECURITY

The advanced security pack adds advanced security mode to the controller's user interface. It is

a standard option on the Gx350i and Gx-OEM controllers. It can be added to Gx150i controllers

by entering a valid configuration code, see

Configuration Code Activation on page 105

Advanced security mode allows users who are part of the Administrator group to:

•

Create, edit and delete users.

•

Create edit and delete user groups.

•

Set and reset passwords.

•

Customise password policy.

•

Customise user group access rights.

Enable Advanced Security Mode

When advanced security mode is active, only users with a valid user name and password will be

able to operate the printer through the user interface.

Note

You will be immediately logged out of the printer when the security mode is

enabled. Before enabling advanced security mode, ensure you have a valid

password to log into the controller, see Log In

see Log In on page 124, L og In

on page 127

To enable the advanced security mode:

1. Log into the controller as an Administrator level user.
2. Select

Home > Setup > Security

3. Change

Security mode

Advanced

End of procedure.

Log In

To log in:

1. Select the

Padlock

icon in the bottom right corner of the user interface.

2. Select

Log in

3. Select a Username and enter the correct Password. The default passwords are defined in

the table below:

Note

Passwords are case sensitive.

OPERATION

127

EPT053091 - Issue 5 - 07 May 2021

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands