Domino Gx-OEM Product Manual Download Page 18

Page: 18 / 198

PRINT HEADS

Print heads are connected to the controller via an electrical cable. There are four cable lengths

available: 3, 6, 12 and 25 metres.
Print heads can be installed together in groups. Print head groups allow taller labels and higher

print density. Print heads in groups can also alternate printing, to reduce downtime when

changing ink cartridges.

Note

Consult Domino if stitch barcodes are required.

Standard Print Head

The standard print head has a socket for connection to the controller at the top.

Standard Print Head

Multi Print Head

The multi print head has a socket connector that can be moved to the front or rear of the print

head. This allows the print head to be installed in areas with different space restrictions, see

Multi Print Head Socket Relocation on page 53

Multi Print Head

SYSTEM DESCRIPTION

EPT053091 - Issue 5 - 07 May 2021

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands