Domino Gx-OEM Product Manual Download Page 173

Page: 173 / 198

File Manager

The File Manager is used to import, export, view, organise and rename labels, images, font files,

and other file types. The File Manager can also copy files from a USB memory device.
To use the file manager:

1. Select

Home > Setup > File Manager

2. Open a folder to view the files saved in that folder.
3. Select the tick box next to a file to enable the options listed below:

Copy

Move

Refresh List

Create New Folder

Rename

Display File Details

Delete

End of procedure.

Import Label

To import a label into the controller from a USB memory device:

1. Insert the USB memory device containing the label files into a USB port on the controller.

Note

FAT32

2. Wait until the USB icon on the information bar turns green.

3. Select

Home > Setup > File Manager

4. Open the

USB

folder.

OPERATION

EPT053091 - Issue 5 - 07 May 2021

168

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands