Domino Gx-OEM Product Manual Download Page 121

Page: 121 / 198

Setting Name

Explanation

Assign Label
(Print Group 4)

Select and assign a label to print group 4.

Home

Press the Home Button at any time to return to this Home

Screen.

Printer Name

Displays the name of the printer that the user interface is

connected to.

The name can be changed by selecting Home > Setup >

System information and changing the Printer name setting.

Label Manager

Open the label manager to create new labels, edit labels,

preview labels and send labels to print.

Number of labels

Displays the number of different labels that are selected for

printing.

Ink settings

Open the Ink settings menu.

Setup

Open the Setup screen, see

Setup Screen on page 116

Date/Time

Displays the system date/time.

Lock

Log the user out from the printer.
Lock the screen to prevent accidental changes.

Setup Screen

The Setup screen contains advanced printer settings, diagnostic tools, and wizards.
This screen is accessed by selecting

Setup

on the Home screen.

OPERATION

EPT053091 - Issue 5 - 07 May 2021

116

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands