Domino Gx-OEM Product Manual Download Page 185

Page: 185 / 198

No.

Alert Text

Alert Level

Description

6060

Print head count of "xx.lbl"

is wrong

Alarm
(Red Alert)

The number of print heads for the label

does not match the print group.
Remedial action: Load the label to the

print head group with the correct

number of print heads. Or adjust the

label height.

6061

Encoder mode of

is wrong Warning

(Amber Alert)

The encoder mode for the label does not

match the print group.
Remedial action: Load the label to the

print group with the correct encoder

mode, or change the encoder mode.

6062

Start mode of

is wrong

Warning
(Amber Alert)

The start mode for the label does not

match the print group.
Remedial action: Check the label's print

start mode and check print trigger

settings.

6069

Mandatory vtext missed,

enter data before printing

Alarm
(Red Alert)

The mandatory data for a variable text

element has not been entered.
Remedial action: Enter the variable text

element data.

6070

Check label file "xx.lbl"

Alarm
(Red Alert)

Error importing label file "xx.lbl".
Remedial action: Check the label file and

save the file again.

6071

Check config file "xx.xml"

Alarm
(Red Alert)

Error importing the configuration file

"xx.xml".
Remedial action: Check the

configuration file and save the file again.

6072

Check ink file "xx.xml"

Alarm
(Red Alert)

Error importing the ink file "xx.xml".
Remedial action: Check the ink file and

save the file again.

6073

File

for label "xx.lbl" does

not exist

Alarm
(Red Alert)

Error in the label file "xx.lbl".
Remedial action: Check if the file is

available and load the label again.

6074

Check config file, heads

number locked

Alarm
(Red Alert)

There are more print heads configured

than enabled by the activation code.
Remedial action: Correct the number of

print heads in the configuration file.

OPERATION

EPT053091 - Issue 5 - 07 May 2021

180

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands