Domino Gx-OEM, Product Manual

Page: 11 / 198

Symbols
The following symbols are used in this product manual to highlight specific warnings and
cautions used in the procedure below the symbols.
Warning or Caution, read and comply with the warning or caution text to avoid
physical injury, damage to equipment or damage to the environment.
Risk of fire by igniting flammable material.
Risk of coming into contact with electricity.
Beware of Electrostatic Discharge (ESD). Electrostatic precautions must be used:
• Switch off the machine.
• Wear a wristband connected to ground.
• Avoid wearing clothing that can build up electrostatic voltages.
• Use ESD protective bags to transport PCBs.
• Only place PCBs on a mat made from a material which will dissipate
electrostatic voltages and which is connected to ground.
Eye protection must be worn.
Protective clothing must be worn. Use adequate protective gloves. Consult the
relevant Safety Data Sheet (SDS).
Disconnect power before carrying out maintenance or repair.
Connect an earth terminal from the product to an appropriate ground source.
INKS AND FLUIDS INFORMATION
Domino supplies Safety Data Sheets (SDS) giving specific safety information for each of its inks.
Safety Data Sheets can be found on the MSDS section of the Domino website.
When used correctly, printing inks do not cause problems. However, everybody using them
should be familiar with the appropriate safety standards and be aware of the precautions that
should be taken. The following are basic requirements:
• Proper standards of industrial practice relating to cleanliness and tidiness must be
maintained.
• Inks and their containers must be stored and handled with care.
Contents
EPT053091 - Issue 5 - 07 May 2021 6