Domino Gx-OEM Product Manual Download Page 174

Page: 174 / 198

5. Open the

sda1

sdb1

folder.

Notes

"sda1" and "sdb1" are the top level partitions of USB memory devices that

are connected to the controller.

2. "sda1" is the first USB memory device that was connected. "sdb1" is the

second USB memory device that was connected.

6. Open the folder that contains the label file.
7. Select the tick box next to the label to be imported.

8. Select the

Copy

Move

icon.

9. On the right side of the screen, navigate to and open the controller's

Label

folder.

10. Select the

Move/Paste

icon.

11. Remove the USB memory device from the controller.

End of procedure.

Export Label

To export a label from the printer to a USB memory device:

1. Insert the USB memory device into a USB port on the controller.

Note

Note: FAT32

2. Wait until the USB icon on the information bar turns green.

3. Select

Home > Setup > File Manager

4. Open the controller's

Label

folder.

5. Select the tick box next to the label to be exported.

OPERATION

169

EPT053091 - Issue 5 - 07 May 2021

Summary of Contents for Gx-OEM







































































































































































































Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands

Domino Gx-OEM, Product Manual

Search results

Summary of Contents for Gx-OEM

Reviews:

Related manuals for Gx-OEM

Brands by name

Popular brands